RS232 to RS485 / RS422, Surge Protected


    Model: XS216

£29.95

Add to Cart:

What we have here is a surge protected RS232 to RS485 / RS422 converter with a strong metal enclosure and several different interface types for connecting RS485 / RS422 cables.
This converter can either be used for converting RS232 to RS485 half duplex or RS232 to RS422 full duplex. It is powered by an external 9 to 30VDC power supply. Automatic Send Data Control is enabled so no control software or drivers are required the converter to work properly. Easy to incorporate in any point-to-point and point-to-multipoint network.

Surge Protection

This unit provides surge protection for up to +/-15KV, 600W for both the interface RS485 and the RS422 interface. Surge protection protects your serial devices and the converter itself against high voltage spikes, ground loops and other surges. It may also help prevent data loss and noise related problems. A feature which is ideal for commercial and industrial environments or other places where voltage spikes are suspected.

Multiple interfaces

One of the great features of this converter is that it has 3 different interfaces for connecting RS485 / RS422. Single wires can be connected by using the screw terminals, a standard DB9 cable can be connected to the DB9 male connector or if your RS485 / RS422 cable has a RJ45 plug then you can connect it directly to the RJ45 port.

Metal enclosure

The aluminum enclosure protects the inside of the converter very well against most environments. By using optional (not included) DIN adapters the converter can easily be installed on a standard DIN rail. Notice, even the enclosure is strong it is not water or dust proof, so we do not recommend using this converter in very wet or dusty environments.

Overall features
  • Multiple interfaces
  • Surge protected
  • Metal enclosure
  • Fail-safe bias resistors
  • Automatic Send Data Control
  • Control LEDs for TX, RX and power
  • 110/240VAC to 12VDC power supply included
  • Compatible with Modbus RTU/ASCII, BACnet
  • Terminal board included
  • Serial RS-232 cable included (M/F)
Resources


Useful optional accessories
(not included)

Null modem adapter
Null modem adapter


DB9 to RJ45 adapter
DB9 - RJ45 adapter


DB9 gender changer
Gender Changer


5V power supply
9V Power supply
SPECIFICATIONS
Model number XS216
Baud rate 300 - 115200bps
Power Externally powered by 9 - 30VDC.
110/240VAC to 12VDC power supply is included
Current consumption less than 20mA
Interface RS-232 DB9 female connector
Interface RS422 DB9 male, RJ45 and terminal board
Working mode 4-wire RS422 asynchronous, full-duplex differential and half-duplex RS485
Standards EIA/TIA RS-232C / RS-422 / RS485
Transmission distance RS232: Typical: 15 FT (5m)
RS422: Typical: 4000 FT (1200m)
ESD protection 1500W / 600W/ms
Operating Temp. -40°F to 180°F (-40°C to 85°C)
Operating humidity 5% To 95% - No Condensation
Compliance CE, FCC, RoHS, ISO 9001
Warranty 1-year Limited Warranty

For alternative RS232 to RS485 / RS422 solutions please see our full selection of serial converters.

Be the first to write a review.  Write a Review.



Tronicore
Idylvaenget 20
6000 Kolding, Denmark

Professional Serial Data Communication
Copyright © 2018 Tronicore. Powered by Tronicore. Data Communication by Tronicore.
Your IP Address is: 54.80.93.19